Top: European, French White Oak, 3mm, sawn wear layer
Width: 190mm (7 1/2″)
Thickness: 14mm (9/16″)
Lengths: Random up to 1828mm (72″)
Minimum 70% at full length
Carton Size: 2.81 square meters (30.25 sqft/crtn)
Pallet Size: 40 cartons
Weight Per Carton: 49 lbs
Finish: Natural (Zero VOC) Hardwax Oil
Surface: Wire Brushed
Edges: Microbevelled
Warranty: 25 year finish, life time structural
Adhesive: Dynea of Norway, marine grade waterproof adhesives. CARB II certified by SCS Global Services
Core and Balancer (Backer): 100% Canadian (SPF) Plywood
Grading: Full tree utilization. Natural colour and character variation between flooring pieces including full range of filled knots up to 2″ diameter , some unfilled open cavities and natural mineral streaks.
Installation method: Floating, direct glue, nail or staple. Below, on or above grade. Approved for installation over Hydronic Radiant Heat systems.
IMPORTANT: It is highly recommended that immediately after installation your Natural Hardwax Oil finished floor be given a complete treatment with Natural Soap (250 ml of soap per 4 litres). This ensures complete coverage of the entire floor surface and adds an additional layer of protection to the oil that was applied in the factory.
